LOOP
LATT CIN2 CLR1&LONG CIN2 CLR4&TEMP GRTN 400
TXT4 --------------------------------------             
TXT5 Select the cross-section of choice   -
TXT6 by giving left/right lat/long pairs. -
TXT7 Once selected, the axis of the       -
TXT8 section will appear on the map.  You -
TXT9 may then procede with your analysis. -
TXTA --------------------------------------
XSCT
ENDL
LOOP
TXT4 ---------------------------------------
TXT5 You may create the cross section of   -
TXT6 your choice now by typing "C" at this -
TXT7 time.  If you do so, you will note    -
TXT8 that you are at the command line of   -
TXT9 WINGRIDDS. Any field you wish to      -
TXTA analyze (eg. Temp, Wind, etc) will    -
TXTB be displayed in cross section mode.   -
TXTC When finished using cross section     -
TXTD mode, go back to the regular planar   -
TXTE mode by typing "PLAN".                -
TXTF                                       -
TXTG If you wish to examine the cross      -
TXTH section of Q-vec div/VVEL/Wind,       -
TXTI procede by hitting the return key now.-
TXTJ----------------------------------------
ENDL
LOOP
CONT SMLC -1   SSUM SMLT DSDX XCMP GEOS DSDX TEMP SMLT DSDX YCMP GEOS DSDY TEMP 
CONT SSUM SMLT DSDY XCMP GEOS DSDX TEMP SMLT DSDY YCMP GEOS DSDY TEMP   
SMLC   -1                                                                 
DNEG DVRG LAST
VVEL&
BKNT&
NLBL XLTN CLRY&
NCLB NLBL PRES CLRY&
XLBL NLBL CLRF LAST&
XLBB NLBL LATT CLRF&
XLBB NLBL DATT LONG CLRF&
endl
loop
ERAS
XSCT 0 0 0 0
ENDL